Image Image Image

racpid 106 heater

The RACPID 106 is not a mere thermoregulator. It also features a dual filter system consisting of a coalescence filter with automatic condensation drain for removing oil mists, lubricating oil vapors, cooling oil, etc. reducing residual oil in the air to just 0.01 μm, and an active carbon filter for purifying the air to reach residual particles inferior to 0.003 mg/m3 (class 1 – ISO 8573-1:2010). After 1,500 hours of operation a message appears on the heater display inviting to replace filters.

The message appears both in the version with and without filters. The RACPID 106 boasts a customized control panel as well as software based on a PID regulation algorithm, which guarantees the constant maintenance of adjusted temperature and is capable of heating the air up to 100 °C. The PID system also reduces unnecessary energy waste: as the adjusted parameter is being reached, consumed energy is zero. The electronic controller memorizes energy consumption. Therefore, by setting the kW/h cost in the dedicated parameter, it is possible to know the exact energy cost.

pdf download the brochure
pdf download the certification
  • Exceptional performance with waterborne paints and work improvement combined with a noticeable reduction of time and consumption

  • Protection of compressed airfed equipment in industrial applications

  • Elimination of energy waste and constant maintenance of adjusted temperature

The RACPID 106 heater can be used in the following fields:

  • Body Shops
  • Industrial Painting
  • Wood industry and joinery
  • Industry
  • Aeronautics
  • Naval
  • Carpentry
  • Medical/Dental

By adjusting the output temperature and keeping it constant, painting advantages are visible during both the spraying and drying stages. The RACPID 106, in fact, solves both problems caused by low winter temperatures, which do not permit paint nebulization at the correct temperatures, and by relative summer humidity which, if inferior to the dew point of the ambient temperature, can result in paint-contaminating condensation. After the paint is sprayed, the RACPID 106 can be used to simply blow hot air on the painted surface.

The RACPID 106 is not a mere thermoregulator. It also features a dual filter system consisting of a coalescence filter with automatic condensation drain for removing oil mists, lubricating oil vapors, cooling oil, etc. reducing residual oil in the air to just 0.01 μm, and an active carbon filter for purifying the air to reach residual particles inferior to 0.003 mg/m3 (class 1 – ISO 8573-1:2010). After 1,500 hours of operation a message appears on the heater display inviting to replace filters.

The message appears both in the version with and without filters. The RACPID 106 boasts a customized control panel as well as software based on a PID regulation algorithm, which guarantees the constant maintenance of adjusted temperature and is capable of heating the air up to 100 °C. The PID system also reduces unnecessary energy waste: as the adjusted parameter is being reached, consumed energy is zero. The electronic controller memorizes energy consumption.

Therefore, by setting the kW/h cost in the dedicated parameter, it is possible to know the exact energy cost.

 

back to the products' catalog